Liquid Cast™ Deep Pour Epoxy Resin Liquid Cast™ Deep Pour Epoxy Resin Liquid Cast™ Deep Pour Epoxy Resin Liquid Cast™ Deep Pour Epoxy Resin

Liquid Cast™ Deep Pour Epoxy Resin

$37.50

Quantity:

*We are currently in the process of updating this product's labels.

Fast and free shipping within the domestic United States. Orders placed before 12PM MST ship same day (M-F)

Customer Reviews

Based on 159 reviews
79%
(125)
8%
(13)
11%
(18)
1%
(1)
1%
(2)
T
TERRI CATON
I love it!

Really great product. Crystal clear and no yellow tint. Bubbles surface easily and I get excellent, even, deep pours.

J
Jennifer Everett
QUALITY PRODUCT

Creates reliable and consistent results when the bottles are at the proper temperature. Well priced. Mixture needs to sit a bit before pouring into mold to get the bubbles to release.

Z
Zimmerman, Benjamin

I like the product. My first pour didn't harden right but I think it may have been because I didn't mix it right. I just did another pour and look forward to see how it turns out. I have used the product before this batch and it worked well.
I plan to buy more here in the short future.

C
Carla Bradshaw
Love it

Great on floral preservations

C
Caridad Otero
Finally!

I have tried out so many epoxy's I am glad I followed my gut & ordered from KRESIN very affordable & great quality

C
Candice G.
Liquid Cast is great!

Clear, very few bubbles! Loved using it!

K
Kim Baluyot
Love it

Works awesome with minimal bubbles!! Would definitely recommend.

G
Glenda Willis
Good quality

Great product definitely easy too use. When I used this I had very little to no bubbles at all. I would definitely recommend.

S
Sandy R
Best resin I’ve ever used

Absolutely love this resin. I spent a lot of money on other resins, and not got the results I wanted. This resin has minimal air bubbles and the ones you do get pop easy with a heat gun. It dries crystal clear and hard. Great for flower preservation. 😁

E
Eve Williams
It's Great

I loved the viscosity of the resin

Need a durable top-coat for your project?

Add a top-coat of Liquid Stone Elite for increased scratch resistance, hardness, and temperature resistance.

Casting small items under 1/2"?

Consider switching to Liquid Art Elite for pours under half an inch.


Liquid Cast™ Deep Pour Epoxy Resin

Liquid Cast™ Deep Pour Epoxy Resin is a two part clear casting epoxy resin system formulated for encapsulating and deep pour casting projects. This product can be poured between a half inch and up to two inches in one pour with little to no trapped air.

 

Liquid Cast™ Deep Pour Epoxy Resin is the perfect choice for flower preservation, river tables, charcuterie boards, and many other casting projects which require layers of epoxy resin over half of an inch.

 

Note: Liquid Cast Deep Pour is not intended for use with small jewelry items, shallow pours, or as a coating system. Pours under 1/2" may remain flexible.

 

Mixed Viscosity: 850 CPS

✔️ 45+ Minute Working Time

 

✔️ Dry in 12-24 Hours

 

✔️ Excellent Air Release

 

✔️ 1:1 Mixing Ratio by Volume

 

✔️ High Gloss Finish

 

✔️ Made in the US

 

✔️ Low Viscosity

 

✔️ No VOC

 

✔️ Ultra-Clear

Product Instructions

Step 1. Prepare for Mixing

Gather your epoxy resin, mixing supplies, and personal protective equipment. We recommend at the very least using nitrile gloves, safety glasses, clothing to protect from spills. Be sure to use epoxy resin in a well-ventilated room or use an air-purifying respirator.

Step 2. Calculate Coverage Area

Using a tape measure, measure the length, width, and depth of your mold and then input this information into the Epoxy Resin Coverage Calculator to determine how much epoxy resin you will need to fill the mold.

Step 3. Pour Epoxy Resin into a Mixing Container

Measure your desired amount of epoxy resin at a 1:1 ratio by volume into a graduated mixing cup. Pour the resin first, allow it a moment to settle, and then follow up with an equal amount of hardener.

Step 4. Mix Thoroughly for Four Minutes

Mix the two parts together for a total of four minutes. Be sure to scrape the bottom and sides of the container while mixing so that there is no un-mixed epoxy resin. Aggressive mixing can introduce excessive air, stir slowly but thoroughly. Continue to stir until the epoxy resin no longer has ribbons and returns to clear.

Step 5. Pour into Mold

Pour the epoxy resin slowly into your mold in 1/4" increments. To minimize trapped air in your project pour in 1/4" increments, allow 1-2 minutes for air to surface, sweep your torch or heat gun over the surface to pop any bubbles, and repeat until you reach your desired depth.

 

Liquid Cast Deep Pour Epoxy Resin is not meant for shallow pours under 1/2". If poured under 1/2" the epoxy resin could remain flexible.

 

In most cases we recommend pouring at 1" - 1.5" to ensure the epoxy resin does not overheat during the curing process. It is better to start small and add layers as necessary than pour too much at once.

Step 6. Use a Torch or Heat Gun to Remove Trapped Air

Quickly sweep a propane torch or heat gun across the surface being sure to keep the flame 6-8 inches away from the surface. Do not overheat the epoxy resin or hold the heat in one spot for too long. We recommend heating the epoxy resin only during the working time, do not apply heat once the working time has passed. After eliminating bubbles allow the epoxy resin time to cure in the appropriate environment (listed in Technical Data below).

 

Ensure that you are working in a well-ventilated room or using an air-purifying respirator.

Questions? Check out our FAQ.

 

Not finding what you need? Email support@ksresin.com for project support.

Common Product Uses

Flower Preservation

River Tables

Encapsulation

Automotive Shift Knobs

Wine Stoppers

Charcuterie Boards

Paper Weights

Technical Data

Ideal Curing Temperature - 65°F - 80°F

Working Time - 45 Minutes

Dry to Touch - 12-36 Hours

Full Cure - 3-7 Days (Depending on volume and mass of pour)

Maximum Recommended Coating Thickness - Not intended for use as a coating system

Maximum Recommended Casting Thickness - 2" per layer

Temperature Resistance - 475°F

Shelf Life (Unopened) - 12 Months

Shelf Life (Opened) - 6 Months (Depending on environment)

Shore D Hardness - 60-70

Kit Sizes

32oz Kit = 16 ounces Resin + 16 ounces Hardener
64oz Kit = 32 ounces Resin + 32 ounces Hardener
1 Gallon Kit = 64 ounces Resin + 64 ounces Hardener
2 Gallon Kit* = 128 ounces Resin + 128 ounces Hardener

 

* (Shipped in multiple 64oz Containers for ease of use, may be occasionally sent in 128oz containers if 64oz containers are unavailable at the time)

Customer Reviews

Looking for tips, tricks, and product support? Join our Facebook Group


People who bought this product, also bought