*We are currently in the process of updating this product's labels.
Liquid Cast™ Deep Pour Epoxy Resin
Fast and free shipping within the domestic United States. Orders placed before 12PM MST ship same day (M-F)
I like the product. My first pour didn't harden right but I think it may have been because I didn't mix it right. I just did another pour and look forward to see how it turns out. I have used the product before this batch and it worked well.
I plan to buy more here in the short future.
Great on floral preservations
I have tried out so many epoxy's I am glad I followed my gut & ordered from KRESIN very affordable & great quality
Clear, very few bubbles! Loved using it!
Works awesome with minimal bubbles!! Would definitely recommend.
Great product definitely easy too use. When I used this I had very little to no bubbles at all. I would definitely recommend.
Absolutely love this resin. I spent a lot of money on other resins, and not got the results I wanted. This resin has minimal air bubbles and the ones you do get pop easy with a heat gun. It dries crystal clear and hard. Great for flower preservation. 😁
I loved the viscosity of the resin
I recently started using this for my molds yes it takes 2 days to reach hard stage but I honestly can't think of a better epoxy this comes out so clear it looks like glass!!! You can see through it no bubbles its literally the prettiest end product I've ever seen!!!
Oh how I love this resin! Finished products are so clear, its easy to work with, bubbles are easily worked out and I haven't noticed it yellowing any like some others I have tried. So glad I found KS resin!
Liquid Cast™ Deep Pour Epoxy Resin
Liquid Cast™ Deep Pour Epoxy Resin is a two part clear casting epoxy resin system formulated for encapsulating and deep pour casting projects. This product can be poured between a half inch and up to two inches in one pour with little to no trapped air.
Liquid Cast™ Deep Pour Epoxy Resin is the perfect choice for flower preservation, river tables, charcuterie boards, and many other casting projects which require layers of epoxy resin over half of an inch.
Note: Liquid Cast Deep Pour is not intended for use with small jewelry items, shallow pours, or as a coating system. Pours under 1/2" may remain flexible.
Mixed Viscosity: 850 CPS
✔️ 45+ Minute Working Time
✔️ Dry in 12-24 Hours
✔️ Excellent Air Release
✔️ 1:1 Mixing Ratio by Volume
✔️ High Gloss Finish
✔️ Made in the US
✔️ Low Viscosity
✔️ No VOC
Step 1. Prepare for Mixing
Gather your epoxy resin, mixing supplies, and personal protective equipment. We recommend at the very least using nitrile gloves, safety glasses, clothing to protect from spills. Be sure to use epoxy resin in a well-ventilated room or use an air-purifying respirator.
Step 2. Calculate Coverage Area
RECTANGLE – Length (inches) x Width (inches) x Height (inches) x 0.6 = Ounces
Example Rectangle Mold – 4” x 4” x 4”:
4” Length x 4” Width x 4” Height = 64 x 0.6 = 38.4 Ounces required for the entire pour.
As this depth is more than recommended for Liquid Cast Deep Pour, we will do complete this project in 3 pours.
CYLINDER - Radius² (inches) x 3.14 x Height (inches) x 0.6 = Ounces required
Example Cylindrical Mold – 12” Round x 1.5 Height:
6” (radius) x 6” (radius) = 36 x 3.14 = 113.04 x 1.5 (height) = 169.56 x 0.6 = 101.74
Radius = Half of diameter. In our example the diameter of the mold is 12” making
the radius 6”.
Step 3. Pour Epoxy Resin into a Mixing Container
Measure your desired amount of epoxy resin at a 1:1 ratio by volume into a graduated mixing cup. Pour the resin first, allow it a moment to settle, and then follow up with an equal amount of hardener.
Step 4. Mix Thoroughly for Four Minutes
Mix the two parts together for a total of four minutes. Be sure to scrape the bottom and sides of the container while mixing so that there is no un-mixed epoxy resin. Aggressive mixing can introduce excessive air, stir slowly but thoroughly. Continue to stir until the epoxy resin no longer has ribbons and returns to clear.
Step 5. Pour into Mold
Pour the epoxy resin slowly into your mold in 1/4" increments. To minimize trapped air in your project pour in 1/4" increments, allow 1-2 minutes for air to surface, sweep your torch or heat gun over the surface to pop any bubbles, and repeat until you reach your desired depth.
Liquid Cast Deep Pour Epoxy Resin is not meant for shallow pours under 1/2". If poured under 1/2" the epoxy resin could remain flexible.
In most cases we recommend pouring at 1" - 1.5" to ensure the epoxy resin does not overheat during the curing process. It is better to start small and add layers as necessary than pour too much at once.
Step 6. Use a Torch or Heat Gun to Remove Trapped Air
Quickly sweep a propane torch or heat gun across the surface being sure to keep the flame 6-8 inches away from the surface. Do not overheat the epoxy resin or hold the heat in one spot for too long. We recommend heating the epoxy resin only during the working time, do not apply heat once the working time has passed. After eliminating bubbles allow the epoxy resin time to cure in the appropriate environment (listed in Technical Data below).
Ensure that you are working in a well-ventilated room or using an air-purifying respirator.
Common Product Uses
Automotive Shift Knobs
Ideal Curing Temperature - 65°F - 80°F
Working Time - 45 Minutes
Dry to Touch - 12-36 Hours
Full Cure - 3-7 Days (Depending on volume and mass of pour)
Maximum Recommended Coating Thickness - Not intended for use as a coating system
Maximum Recommended Casting Thickness - 2" per layer
Temperature Resistance - 475°F
Shelf Life (Unopened) - 12 Months
Shelf Life (Opened) - 6 Months (Depending on environment)
Shore D Hardness - 60-70
32oz Kit = 16 ounces Resin + 16 ounces Hardener
64oz Kit = 32 ounces Resin + 32 ounces Hardener
1 Gallon Kit = 64 ounces Resin + 64 ounces Hardener
2 Gallon Kit* = 128 ounces Resin + 128 ounces Hardener
* (Shipped in multiple 64oz Containers for ease of use, may be occasionally sent in 128oz containers if 64oz containers are unavailable at the time)