Liquid Stone Elite™ Countertop Epoxy Resin Liquid Stone Elite™ Countertop Epoxy Resin Liquid Stone Elite™ Countertop Epoxy Resin

Liquid Stone Elite™ Countertop Epoxy Resin

$110.00

Quantity:

Fast and free shipping within the domestic United States. Orders placed before 12PM MST ship same day (M-F)

Customer Reviews

Based on 10 reviews
100%
(10)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Diane Parker
Old to New Ocean Scene Dresser

I love love love this product. I used it on an ugly old dresser that was made into a beautiful OCEAN dresser. This product works excellent with color added to it, without changing the look of your color. I also added sand to one of the layers and the liquid stone elite worked excellent with it.

I would highly recommend this product and company.

T
The Floral Cactus Co.
My favorite epoxy!

KS products are top notch and my very favorite!!! I love how low odor they are what a gorgeous finish they cure to!!

B
Beverly Colasanti
Little to no bubbles!

I love how there is little to no bubbles!! If you let it sit for 2 minutes they are gone. I will
Be purchasing more.

C
Carla schank
smooth as glass!

Love it! finish is as smooth as glass

A
Anonymous
KSResin is all I use!!!

This was an excellent formula and the perfect consistency!

C
Candice G.
Great product!

Loved using this product. Easy 1:1 and cures rock hard.

A
Amy Hunt
Game changer!!!!

I am working with the liquid stone elite. I'm in love! Mixes smooth and with little to NO BUBBLES. I didn't even have to pre warm my epoxy before mixing. Goes on tumblers like butta! Very smooth. Thanks KS Resin for making this epoxy!!!!💕❤️💕

M
Maria ORDAZ
Loving it!

Love it!

L
Lib Henderson

Liquid Stone Elite™ Countertop Epoxy Resin

L
LAURA WEBER-BUTCHER
Countertops

Easy to use on my kitchen countertops. Had plenty of working time, but it set at a decent pace too so I wasn’t babysitting dripping all day.


Liquid Stone Elite™ Countertop Epoxy Resin

Liquid Stone Elite™ is a two part clear epoxy resin system formulated for coating bartops, tabletops, and countertops. If you are looking for a premium epoxy resin that cures water-clear, has excellent durability, cures rock hard, has high temperature resistance, and offers excellent UV resistance Liquid Stone Elite is for you.

 

Liquid Stone Elite™ is a thinner viscosity than Liquid Stone™ and Liquid Stone Ultra UV™, and has a significantly longer working and drying time.

 

This product does not require a UV light to cure.

 

Mixed Viscosity: 2800 CPS

✔️ 60+ Minute Working Time

 

✔️ Dry in 12-18 Hours

 

✔️ 1:1 Mixing Ratio by Volume

 

✔️ High Gloss Finish

 

🔥 High Temperature Resistance

 

☀️ Industry Leading UV Resistance

 

✔️ Made in the US

 

✔️ No VOC

 

✔️ Self-Leveling

 

✔️ Ultra-Clear

Product Instructions

Step 1. Calculate Surface Area and Check Level

Using a tape measure, measure the square feet of your surface (Length x Width). We recommend mixing 3 ounces per square foot for clear coats, and 4-6 ounces for coats that you plan to add colorant to, and up to 10 ounces per square foot for dirty pours. Remember to add extra epoxy resin to account for your sides. After calculating the amount of epoxy resin that your project will require, make sure that your surface is completely level and adjust as needed. A level surface is very important.

 

Example Surface is 2.08' wide by 8' long or 16.64 square feet

Clear Coat - 16.64 x 3oz = 50oz

Add additional 10% to account for sides - 55oz required to clear coat this surface

Step 2. Prepare for Mixing

Gather your epoxy resin, mixing supplies, and personal protective equipment. We recommend at the very least using nitrile gloves, safety glasses, clothing to protect from spills. Be sure to use epoxy resin in a well-ventilated room or use an air-purifying respirator.

Step 3. Cover Cabinets and Floors with Plastic

Before applying epoxy resin to the surface utilize plastic sheeting to cover any surfaces that epoxy resin could get on. We recommend applying tape to the backsplash/wall, plastic on the floor, as well as plastic covering all cabinets. Be mindful of where you walk to ensure you do not track epoxy resin outside of your work area.

Step 4. Pour Epoxy Resin into a Mixing Container

Measure your desired amount of epoxy resin at a 1:1 ratio by volume into a graduated mixing cup. Pour the resin first, allow it a moment to settle, and then follow up with an equal amount of hardener.

Step 5. Mix Thoroughly for Four Minutes

Mix the two parts together for a total of four minutes. Be sure to scrape the bottom and sides of the container while mixing so that there is no un-mixed epoxy resin. Aggressive mixing can introduce excessive air, stir slowly but thoroughly. Continue to stir until the epoxy resin no longer has ribbons and returns to clear.

Step 6. Apply to Surface

Apply the epoxy resin to your surface immediately after mixing. You can do this by using your gloved hand, a foam roller, a brush, a trowel, and many other tools. Make sure that epoxy resin completely covers the surface. Using your gloved hand or spreading utensil, apply epoxy resin to the sides of the surface (if necessary).

 

If you do not apply enough epoxy resin it may pull away from the edge. If you apply too much epoxy resin it can drip off or run to one end depending on the surface.

Step 7. Use a Torch or Heat Gun to Remove Trapped Air

Quickly sweep a propane torch or heat gun across the surface being sure to keep the flame 6-8 inches away from the surface. Do not overheat the epoxy resin or hold the heat in one spot for too long. We recommend heating the epoxy resin only during the working time, do not apply heat once the working time has passed. After eliminating bubbles allow the epoxy resin time to cure in the appropriate environment (listed in Technical Data below).

 

It is very important that the epoxy resin has a consistent curing temperature throughout the entire curing process. Keep in mind that curing the epoxy resin in a warmer environment will yield a more durable surface. We recommend a maximum of 120° F and a minimum of 75° F.

 

Ensure that you are working in a well-ventilated room or using an air-purifying respirator.

 

Tip: Hate those pesky drips? Wait a couple of hours after applying the epoxy resin and return with a spreader or knife and push the tool up against the bottom of the surface while simultaneously pulling the tool from side to side at a slight angle. The epoxy resin will have thickened up enough where it will no longer drip and you will not need to sand the drips off the following day.

Step 8. Apply Additional Layers

We recommend applying at least two layers of epoxy resin for added surface protection. There are two ways of adding additional layers of epoxy resin to the existing layer.

 

1. Apply the next layer while the last layer is still tacky to the touch. Allow the first layer to dry for 3-6 hours and lightly touch it with a gloved hand. If the epoxy resin coating feels tacky without pulling up like taffy, you can apply an additional layer at this time. Applying an additional layer while the previous layer is still tacky gives you a chemical bond.

 

2. Apply the next layer after the last layer has dried for 24 hours. Lightly sand the last layer with 220 grit sandpaper, remove any debris from sanding, and apply an additional layer starting with Step 1. Applying an additional layer after sanding will give you a mechanical bond.

 

Both methods are excellent options for applying additional layers. The chemical bond will allow you to complete your project faster, while the mechanical bond may allow you to remove any surface imperfections before the final coat.


Questions? Check out our FAQ.

 

Not finding what you need? Email support@ksresin.com for project support.

Recommended Uses

Bartops

Tabletops

Countertops

End Tables

Stainless Steel Tumblers

Surfaces that require a durable top-coat

Technical Data

Ideal Curing Temperature - 75°F - 80°F

Working Time - 60+ Minutes

Dry to Touch - 12-18 Hours

Full Cure - 72 Hours

Maximum Recommended Coating Thickness - 1/8"

Maximum Recommended Casting Thickness - 1/4"

Temperature Resistance - 500°F

Shelf Life (Unopened) - 12 Months

Shelf Life (Opened) - 6 Months (Depending on environment)

Shore D Hardness - 76

Kit Sizes

64oz Kit = 32 ounces Resin + 32 ounces Hardener
1 Gallon Kit = 64 ounces Resin + 64 ounces Hardener
2 Gallon Kit* = 128 ounces Resin + 128 ounces Hardener

 

* (Shipped in multiple 64oz Containers for ease of use, may be occasionally sent in 128oz containers if 64oz containers are unavailable at the time)

Customer Review

Looking for tips, tricks, and product support? Join our Facebook Group


People who bought this product, also bought