32oz & 64oz Kit Dispensing Pumps

32oz & 64oz Kit Dispensing Pumps

$25.00

Quantity:

CLEAN BEFORE USE. PLEASE READ ALL INFORMATION BELOW BEFORE PURCHASE.

32oz & 64oz Kit Dispensing Pumps fit the following kits:

- 64oz Kit (32oz Bottles)
- 32oz Kit (16oz Bottles)

These dispensing pumps DO NOT work with 1 Gallon Kits, 2 Gallon Kits, or 4 Gallon Kits. To purchase pumps for those containers, please click here. 

These dispensing pumps DO NOT work with 8oz Kits or 16oz Kits.

Dispensing Pumps are sold in pairs (one for Resin and one for Hardener).

Pumps output 8ml per stroke. 

Dispensing Pumps Dip Tube need to be trimmed to fit as they are made for multiple bottle sizes. This will not effect the amount of product dispensed per stroke. 

Before use, we recommend cleaning the pump with isopropyl alcohol. You can do this by pumping isopropyl alcohol through the pump. Dispensing pumps are manufactured with oil on the metal spring to prevent them from rusting, this oil can cause fish eyes and cloudiness if it is not cleaned out of the dispensing pumps. If you find the pumps are pumping cloudy after thoroughly cleaning them, we recommend warming up the epoxy resin in the container to help lower the viscosity. 


Questions about ordering? Email support@ksresin.com and we will happily help you find what you need. 

Customer Reviews

Based on 34 reviews
74%
(25)
9%
(3)
18%
(6)
0%
(0)
0%
(0)
S
S.E.
The larger pumps leak

The larger pumps leak. I have tried to clean and make sure no air bubbles. To no avail. I have discontinued use of these pumps. And purchased from another company.

Thank you for your feedback. The pumps definitely should not be leaking as our pumps have a spout that can be turned 180° to face up preventing them from leaking. If you continue to experience this issue, please let us know so that we can help find a resolution.

M
M.S.
Good but pricey

These work great but I had a little trouble getting them to start pumping: I ordered these the last time I purchased Liquidy Split (which I love) and initially they would not work...I pumped and pumped and nothing. I was ready to send them back, but after about 5 minutes of steadily pumping, they finally started to work. They have worked perfectly ever since.

I have found them to be very pricey, comparably speaking. However, I knew they were calibrated correctly coming from KS Resin. I have a lot of neuropathy, so for me, they were worth the expense.
Would I buy them again? Doubtful, at this price.
As expensive as resin is, it would be nice if the pumps were included--I wouldn't mind paying a little more for the pumps to be included ($10 more--not $25)

Thanks for your feedback! There are certainly less expensive options available elsewhere, but we did our best to source the best dispensing pumps we could find for this product. The prices of our products are based on the cost of raw materials, and once again we strive for quality.

C
C.B.
Pumps & Resin

Pumps work great & absolutely love the epoxy resin

P
P.M.
I LOVE YOUR EPOXY :)

THIS IS THE BEST EPOXY I HAVE EVER USED.

B
B.F.
priceless

Having these pumps have been a life saver for me. I highly recommend them to anyone turning tumblers.

Customer Reviews

Based on 34 reviews
74%
(25)
9%
(3)
18%
(6)
0%
(0)
0%
(0)
S
S.E.
The larger pumps leak

The larger pumps leak. I have tried to clean and make sure no air bubbles. To no avail. I have discontinued use of these pumps. And purchased from another company.

Thank you for your feedback. The pumps definitely should not be leaking as our pumps have a spout that can be turned 180° to face up preventing them from leaking. If you continue to experience this issue, please let us know so that we can help find a resolution.

M
M.S.
Good but pricey

These work great but I had a little trouble getting them to start pumping: I ordered these the last time I purchased Liquidy Split (which I love) and initially they would not work...I pumped and pumped and nothing. I was ready to send them back, but after about 5 minutes of steadily pumping, they finally started to work. They have worked perfectly ever since.

I have found them to be very pricey, comparably speaking. However, I knew they were calibrated correctly coming from KS Resin. I have a lot of neuropathy, so for me, they were worth the expense.
Would I buy them again? Doubtful, at this price.
As expensive as resin is, it would be nice if the pumps were included--I wouldn't mind paying a little more for the pumps to be included ($10 more--not $25)

Thanks for your feedback! There are certainly less expensive options available elsewhere, but we did our best to source the best dispensing pumps we could find for this product. The prices of our products are based on the cost of raw materials, and once again we strive for quality.

C
C.B.
Pumps & Resin

Pumps work great & absolutely love the epoxy resin

P
P.M.
I LOVE YOUR EPOXY :)

THIS IS THE BEST EPOXY I HAVE EVER USED.

B
B.F.
priceless

Having these pumps have been a life saver for me. I highly recommend them to anyone turning tumblers.


People who bought this product, also bought