Liquid Art™ Epoxy Resin
Liquid Art™ is a two part clear entry-level epoxy resin system formulated for creating and coating works of art. If you are looking for an epoxy resin that is affordable, cures water-clear, has U.V. resistance, a long working time and is easy to work with, this product is for you.
Liquid Art™ is the perfect choice for beginners that are interested in learning to work with epoxy resin. It is a high-quality epoxy resin that is suitable for many general projects.
Consider upgrading to Liquid Art Ultra UV for improved UV Resistance, or Liquid Art Elite for a thinner system with less trapped air.
Mixed Viscosity: 4600 CPS
✔️ 45+ Minute Working Time
✔️ Dry in 10-12 Hours
✔️ 1:1 Mixing Ratio by Volume
✔️ High Gloss Finish
✔️ Made in the US
✔️ Medium Viscosity
✔️ No VOC
Step 1. Prepare for Mixing
Gather your epoxy resin, mixing supplies, and personal protective equipment. We recommend at the very least using nitrile gloves, safety glasses, clothing to protect from spills. Be sure to use epoxy resin in a well-ventilated room or use an air-purifying respirator.
Step 2. Pour Epoxy Resin into a Mixing Container
After determining the amount of epoxy resin you will need, measure your desired amount of epoxy resin at a 1:1 ratio by volume into a graduated mixing cup. Pour the resin first, allow it a moment to settle, and then follow up with an equal amount of hardener.
For best results mix a minimum of 2 fluid ounces (60ml) of epoxy resin and hardener.
Need help deciding how much epoxy resin is required? Visit our Epoxy Resin Coverage Calculator here.
Step 3. Mix Thoroughly for Four Minutes
Mix the two parts together for a total of four minutes. Be sure to scrape the bottom and sides of the container while mixing so that there is no un-mixed epoxy resin. Aggressive mixing can introduce excessive air, stir slowly but thoroughly. Continue to stir until the epoxy resin no longer has ribbons and returns to clear.
Step 4. Apply to Surface
Apply the epoxy resin to your surface immediately after mixing. You can do this by using your gloved hand, a foam roller, a brush, a trowel, and so many other tools! Make sure that epoxy resin completely covers the surface before moving to the next step. If you do not apply enough epoxy resin it may pull away from the edge. If you apply too much epoxy resin it can drip off or run to one end depending on the surface.
Step 5. Use a Torch or Heat Gun to Remove Trapped Air
Quickly sweep a propane torch or heat gun across the surface being sure to keep the flame 6-8 inches away from the surface. Do not overheat the epoxy resin or hold the heat in one spot for too long. We recommend heating the epoxy resin only during the working time, do not apply heat once the working time has passed. After eliminating bubbles allow the epoxy resin time to cure in the appropriate environment (listed in Technical Data below).
Ensure that you are working in a well-ventilated room or using an air-purifying respirator.
- Stainless Steel Tumblers
- Canvas Paintings
- Wood Substrates
- Small Molds
- & Much More
Ideal Curing Temperature - 65°F - 80°F
Working Time - 45 Minutes
Dry to Touch - 10-12 Hours
Full Cure - 72 Hours
Maximum Recommended Coating Thickness - 1/8"
Maximum Recommended Casting Thickness - 1/4"
Temperature Resistance - 475°F
Shelf Life (Unopened) - 12 Months
Shelf Life (Opened) - 6 Months (Depending on environment)
Shore D Hardness - 75
8oz Kit = 4 ounces Resin + 4 ounces Hardener
16oz Kit = 8 ounces Resin + 8 ounces Hardener
32oz Kit = 16 ounces Resin + 16 ounces Hardener
64oz Kit = 32 ounces Resin + 32 ounces Hardener
1 Gallon Kit = 64 ounces Resin + 64 ounces Hardener
2 Gallon Kit* = 128 ounces Resin + 128 ounces Hardener
* (Shipped in multiple 64oz Containers for ease of use, may be occasionally sent in 128oz containers if 64oz containers are unavailable at the time)
I'm new at this but i have tried 5 different epoxy and let me tell you i found my home here. You need to try you need to buy..
Liquid Art epoxy resin is Amazing!! So easy to work with and it levels perfect on my tumblers. No issues with bubbles. I will be purchasing again for sure!! I LOVE this product!!
Easy to use. Bubbles leave and don’t come back. I love that it’s heat resistant for coasters. I don’t use resin very often but when I do it’s KSResin. Also, I’ if you have questions they are so responsive and patient. They WANT to help you. Love this product!
I absolutely love the thickness, drying time, and I will a returning customer for sure
This is my favorite product! So easy to use and always gives an awesome result!
I absolutely love KSRESIN!! Since I've started using their products, I've never turned back. I have used most of their products to date. Working time fits perfect for any projects I'm working with.
I was very hesitant to apply resin on my paintings, I researched and learned that KS was one of the best, and it is! It has such wonderful self-leveling when you pour it on and cover your art. The glass like finish is incredible, it was so much easier than I had anticipated! I highly recommend this product! Thank you!
This is the best resin I've used for art!
I like the epoxy however lots of bubbles
I've taken the precautions on trying to prevent as many, but it's heartbreaking when you do a final coat and surprise! A big bubble 😳
Love the product, fast shipping