Liquid Art Ultra UV Epoxy Resin - Best UV Resistance

Regular price$110.00
/

Experience the best of both worlds with Liquid Art Ultra UV - the two-part epoxy resin system that delivers stunning clarity, unbeatable UV resistance, and a high-gloss finish that will make your artwork shine. With over 1,600 positive reviews, Liquid Art Ultra UV is our best-selling product for good reason.

Perfect for creating epoxy tumblers, coating canvases, or any other project that requires superior UV resistance, Liquid Art Ultra UV contains our Ultra UV inhibitors - hindered amine light stabilizers that protect against the harmful effects of UV rays. Unlike other tumbler epoxies on the market, Liquid Art Ultra UV has been rigorously tested in a QUV machine and has shown up to 10 times longer lasting clarity compared to the regular Liquid Art formula and similar competitors' products.

But Liquid Art Ultra UV isn't just for tumblers. Its versatility and long working time make it a top choice for any artwork or DIY project that demands the highest level of clarity and durability. And with a mixed viscosity of 4600 cP, it's thick enough to stay put while still flowing smoothly and evenly over any surface.

Best of all, Liquid Art Ultra UV cures without the need for a UV light. So whether you're a seasoned artist or a beginner looking to bring your creations to life, Liquid Art Ultra UV is the clear choice for professional-grade results that will last a lifetime.

✔️ 45+ Minute Working Time
✔️ Dry in 10-12 Hours
✔️ 1:1 Mixing Ratio by Volume
✔️ High Gloss Finish
☀️ Industry Leading UV Resistance
✔️ Made in the US
✔️ No VOC
✔️ Ultra-Clear

Product Instructions

Step 1. Prepare for Mixing

Gather your epoxy resin, mixing supplies, and personal protective equipment. We recommend at the very least using nitrile gloves, safety glasses, clothing to protect from spills. Be sure to use epoxy resin in a well-ventilated room or use an air-purifying respirator.

Step 2. Pour Epoxy Resin into a Mixing Container

After determining the amount of epoxy resin you will need, measure your desired amount of epoxy resin at a 1:1 ratio by volume into a graduated mixing cup. Pour the resin first, allow it a moment to settle, and then follow up with an equal amount of hardener.

 

For best results mix a minimum of 2 fluid ounces (60ml) of epoxy resin and hardener.

 

Need help deciding how much epoxy resin is required? Visit our Epoxy Resin Coverage Calculator here.

Step 3. Mix Thoroughly for Four Minutes

Mix the two parts together for a total of four minutes. Be sure to scrape the bottom and sides of the container while mixing so that there is no un-mixed epoxy resin. Aggressive mixing can introduce excessive air, stir slowly but thoroughly. Continue to stir until the epoxy resin no longer has ribbons and returns to clear.

Step 4. Apply to Surface

Apply the epoxy resin to your surface immediately after mixing. You can do this by using your gloved hand, a foam roller, a brush, a trowel, and so many other tools! Make sure that epoxy resin completely covers the surface before moving to the next step. If you do not apply enough epoxy resin it may pull away from the edge. If you apply too much epoxy resin it can drip off or run to one end depending on the surface.

Step 5. Use a Torch or Heat Gun to Remove Trapped Air

Quickly sweep a propane torch or heat gun across the surface being sure to keep the flame 6-8 inches away from the surface. Do not overheat the epoxy resin or hold the heat in one spot for too long. We recommend heating the epoxy resin only during the working time, do not apply heat once the working time has passed. After eliminating bubbles allow the epoxy resin time to cure in the appropriate environment (listed in Technical Data below).

 

Ensure that you are working in a well-ventilated room or using an air-purifying respirator.

Questions? Check out our FAQ.

 

Not finding what you need? Email support@ksresin.com for project support.

Recommended Uses

  • Stainless Steel Tumblers
  • Canvas Paintings
  • Wood Substrates
  • Small Molds
  • Coasters
  • Jewelry
  • & Much More

Technical Data

Ideal Curing Temperature - 65°F - 80°F
Working Time - 45 Minutes
Dry to Touch - 10-12 Hours
Full Cure - 72 Hours
Maximum Recommended Coating Thickness - 1/8"
Maximum Recommended Casting Thickness - 1/4"
Temperature Resistance - 475°F
Shelf Life (Unopened) - 12 Months
Shelf Life (Opened) - 6 Months (Depending on environment)
Shore D Hardness - 75

Kit Sizes

8oz Kit = 4 ounces Resin + 4 ounces Hardener
16oz Kit = 8 ounces Resin + 8 ounces Hardener
32oz Kit = 16 ounces Resin + 16 ounces Hardener
64oz Kit = 32 ounces Resin + 32 ounces Hardener
1 Gallon Kit = 64 ounces Resin + 64 ounces Hardener
2 Gallon Kit* = 128 ounces Resin + 128 ounces Hardener

 

* (Shipped in multiple 64oz Containers for ease of use, may be occasionally sent in 128oz containers if 64oz containers are unavailable at the time)

Customer Reviews

Customer Reviews

Based on 1622 reviews
89%
(1445)
7%
(108)
4%
(63)
0%
(2)
0%
(4)
T
Tasha Harrigan

Best epoxy I have ever tried :))

T
Tasha Conn
Best 2 part resin

I triedKSResin with a 16 oz kit and fell in love! After refilling with the gallon kit, I opted to try the uv one and have noticed already less yellowing

S
Sammie Kornoelje
Love it!

Absolutely love! Second time ordering! Probably the only one I’ll ever use

K
Kimberly Kober
Tumblers

Really great quality resin! My cups look great!

T
Tammy Power
Satufoed

My first time ordering. Shipment was on time and I am pleased with the resin!

A
Ashley Herman

Best epoxy!

D
Debbi Elza
Luv

Love the liquid art ultra uv. I use it on my canvases, molds. Releases bubbles easily. No smell. Cures beautifully.

R
Ranae Koyamatsu

I love KS Resin and it’s the only resin I use. I use a lot of it almost daily. Most of the time, I can do a project in only 1 coat. I recommend this resin to everyone.

C
Christopher Moch

Liquid Art Ultra UV™ Epoxy Resin - Best UV Resistance

l
linda reitz
Ocean art

I've been using this for my ocean art classes and everypne is loving it.