Introducing Liquidy Split - the two-part epoxy resin system that dries faster than the speed of art. Developed specifically for epoxy tumblers, filling voids in epoxy river tables, and other epoxy projects that require a quick-drying coating, Liquidy Split delivers professional-quality results in a fraction of the time.
With its accelerated drying properties, Liquidy Split is perfect for artists who require an epoxy resin with a shorter working time, drying time, and curing time. But don't let its speed fool you - Liquidy Split is still a high-quality epoxy resin that delivers exceptional clarity and durability.
Unlike other fast-drying epoxy resin systems, Liquidy Split stays clear while curing, making it an excellent choice for top coats and projects with light colors. And with a mixed viscosity of 6900 CPS, it's thick enough to stay put while still flowing smoothly and evenly over any surface.
For even greater UV resistance, consider upgrading to Liquidy Split Ultra UV. Whether you're a professional artist or a DIY enthusiast, Liquidy Split is the clear choice for fast-drying, professional-grade results that will take your art to the next level.
✔️ 15 Minute Working Time
✔️ Dry in 3-4 Hours
✔️ 1:1 Mixing Ratio by Volume
✔️ High Gloss Finish
✔️ Made in the US
✔️ Medium Viscosity
✔️ No VOC
✔️ Super Clear
Step 1. Prepare for Mixing
Gather your epoxy resin, mixing supplies, and personal protective equipment. We recommend at the very least using nitrile gloves, safety glasses, clothing to protect from spills. Be sure to use epoxy resin in a well-ventilated room or use an air-purifying respirator.
Step 2. Pour Epoxy Resin into a Mixing Container
After determining the amount of epoxy resin you will need, measure your desired amount of epoxy resin at a 1:1 ratio by volume into a graduated mixing cup. Pour the resin first, allow it a moment to settle, and then follow up with an equal amount of hardener.
For best results mix a minimum of 2 fluid ounces (60ml) of epoxy resin and hardener. Mixing less than 2 ounces increases the chance of the mixing ratio being off and causing issues during the curing process.
Need help deciding how much epoxy resin is required? Visit our Epoxy Resin Coverage Calculator here.
Step 3. Mix Thoroughly for Four Minutes
Mix the two parts together for a total of four minutes. Be sure to scrape the bottom and sides of the container while mixing so that there is no un-mixed epoxy resin. Aggressive mixing can introduce excessive air, stir slowly but thoroughly. Continue to stir until the epoxy resin no longer has ribbons and returns to clear.
Step 4. Apply to Surface
Apply the epoxy resin to your surface immediately after mixing. You can do this by using your gloved hand, a foam roller, a brush, a trowel, and so many other tools! Make sure that epoxy resin completely covers the surface before moving to the next step. If you do not apply enough epoxy resin it may pull away from the edge. If you apply too much epoxy resin it can drip off or run to one end depending on the surface.
Step 5. Use a Torch or Heat Gun to Remove Trapped Air
Quickly sweep a propane torch or heat gun across the surface being sure to keep the flame 6-8 inches away from the surface. Do not overheat the epoxy resin or hold the heat in one spot for too long. We recommend heating the epoxy resin only during the working time, do not apply heat once the working time has passed. After eliminating bubbles allow the epoxy resin time to cure in the appropriate environment (listed in Technical Data below).
Ensure that you are working in a well-ventilated room or using an air-purifying respirator.
- Stainless Steel Tumblers
- Canvas Paintings
- Wood Substrates
- Filling Voids
- Small Molds
- & Much More
Ideal Curing Temperature - 75°F - 80°F
(Temperatures below 75°F can cause issues during curing)
Working Time - 15 Minutes
Dry to Touch - 3-4 Hours
Full Cure - 24 Hours
Maximum Recommended Coating Thickness - 1/8"
Maximum Recommended Casting Thickness - 1/4"
Temperature Resistance - 475°F
Shelf Life (Unopened) - 12 Months
Shelf Life (Opened) - 6 Months (Depending on environment)
Shore D Hardness - 75
8oz Kit = 4 ounces Resin + 4 ounces Hardener
16oz Kit = 8 ounces Resin + 8 ounces Hardener
32oz Kit = 16 ounces Resin + 16 ounces Hardener
64oz Kit = 32 ounces Resin + 32 ounces Hardener
1 Gallon Kit = 64 ounces Resin + 64 ounces Hardener
2 Gallon Kit* = 128 ounces Resin + 128 ounces Hardener
* (Shipped in multiple 64oz Containers for ease of use, may be occasionally sent in 128oz containers if 64oz containers are unavailable at the time)
It’s freaking amazing, wish I would have tried it sooner
I only use this Fast set Resin for my Tumblers! I Am very happy with the beautiful Clear and Shiny results!
I love this resin. It is by far the best resin I have ever used. I love how quickly it dries and the beautiful lasting results. Thank you so much for an amazing product that not only delivers but does what isadvertised.
Dries quickly and very smooth with little bubbles.
Only problem is when it touch skin makes it itch. No break out.
I love this fast set my cups come out beautiful thank you . Just wish it wasn’t so expensive!
I will be using Liquidy Split from now on. The things I absolutely love about it is that it’s thicker. After 4 hours it’s no longer sticky. It’s cured in 24 hours!!! I can get more cups done!!
It was a total game changer, love it
I LOVE KSRESIN. Its the ONLY epoxy I use. The liquidy split cures in such less time. I am able to work on a tumbler twice a day instead of days apart. I wont use any other kind!
I tried a technique that I wanted, but it was a bit of a disaster. I only got maybe 10 minutes of working time, and then I couldn't get my silicone cup cleaned out. I tried to pull it out, and ripped my cup so I had to order a new one.