Liquid Art Elite™ Epoxy Resin - Thin Coating Formula with UV Resistance

Regular price$50.00
/

Looking for Fast Set?

Switch to Liquidy Split and complete your projects faster. 

Liquid Art Elite™ Epoxy Resin

Liquid Art Elite™ is a two part epoxy resin system formulated for creating and coating works of art. Liquid Art Elite™ has improved bubble release, improved color stability, improved clarity, improved scratch resistance, and a higher temperature resistance than the other Liquid Art™ products.

Liquid Art Elite™ is a thinner viscosity than Liquid Art™ and Liquid Art Ultra UV™, and has a significantly longer working and drying time.

Mixed Viscosity: 2700 CPS

✔️ 60+ Minute Working Time
✔️ Dry in 12-18 Hours
✔️ 1:1 Mixing Ratio by Volume
✔️ High Gloss Finish
🔥 High Temperature Resistance
☀️ Industry Leading UV Resistance
✔️ Made in the US
✔️ No VOC
✔️ Ultra-Clear

Product Instructions

Step 1. Prepare for Mixing

Gather your epoxy resin, mixing supplies, and personal protective equipment. We recommend at the very least using nitrile gloves, safety glasses, clothing to protect from spills. Be sure to use epoxy resin in a well-ventilated room or use an air-purifying respirator.

Step 2. Pour Epoxy Resin into a Mixing Container

After determining the amount of epoxy resin you will need, measure your desired amount of epoxy resin at a 1:1 ratio by volume into a graduated mixing cup. Pour the resin first, allow it a moment to settle, and then follow up with an equal amount of hardener.

 

For best results mix a minimum of 2 fluid ounces (60ml) of epoxy resin and hardener.

 

Need help deciding how much epoxy resin is required? Visit our Epoxy Resin Coverage Calculator here.

Step 3. Mix Thoroughly for Four Minutes

Mix the two parts together for a total of four minutes. Be sure to scrape the bottom and sides of the container while mixing so that there is no un-mixed epoxy resin. Aggressive mixing can introduce excessive air, stir slowly but thoroughly. Continue to stir until the epoxy resin no longer has ribbons and returns to clear.

Step 4. Apply to Surface

Apply the epoxy resin to your surface immediately after mixing. You can do this by using your gloved hand, a foam roller, a brush, a trowel, and so many other tools! Make sure that epoxy resin completely covers the surface before moving to the next step. If you do not apply enough epoxy resin it may pull away from the edge. If you apply too much epoxy resin it can drip off or run to one end depending on the surface.

Step 5. Use a Torch or Heat Gun to Remove Trapped Air

Quickly sweep a propane torch or heat gun across the surface being sure to keep the flame 6-8 inches away from the surface. Do not overheat the epoxy resin or hold the heat in one spot for too long. We recommend heating the epoxy resin only during the working time, do not apply heat once the working time has passed. After eliminating bubbles allow the epoxy resin time to cure in the appropriate environment (listed in Technical Data below).

 

Ensure that you are working in a well-ventilated room or using an air-purifying respirator.

Questions? Check out our FAQ.

 

Not finding what you need? Email support@ksresin.com for project support.

Recommended Uses

  • Stainless Steel Tumblers
  • Canvas Paintings
  • Wood Substrates
  • Small Molds
  • Coasters
  • Jewelry
  • & Much More

Technical Data

Ideal Curing Temperature - 65°F - 80°F
Working Time - 60+ Minutes
Dry to Touch - 12-18 Hours
Full Cure - 72 Hours
Maximum Recommended Coating Thickness - 1/8"
Maximum Recommended Casting Thickness - 1/4"
Temperature Resistance - 475°F
Shelf Life (Unopened) - 12 Months
Shelf Life (Opened) - 6 Months (Depending on environment)
Shore D Hardness - 75

Kit Sizes

32oz Kit = 16 ounces Resin + 16 ounces Hardener
64oz Kit = 32 ounces Resin + 32 ounces Hardener
1 Gallon Kit = 64 ounces Resin + 64 ounces Hardener
2 Gallon Kit* = 128 ounces Resin + 128 ounces Hardener

 

* (Shipped in multiple 64oz Containers for ease of use, may be occasionally sent in 128oz containers if 64oz containers are unavailable at the time)

Customer Reviews

Looking for tips, tricks, and product support? Join our Facebook Group

Customer Reviews

Based on 126 reviews
87%
(110)
7%
(9)
5%
(6)
0%
(0)
1%
(1)
k
kb
So easy to use

I watched a multitude of YT resin videos and saw this resin is highly rated. This was the first resin I have ever used and was extremely pleased with the whole process.

W
Wenona Welch
First time User

Shipping was quick. Epoxy is awesome 🤩

K
Kelly Ringle
Love it !

Amazing ! Works so wonderful on my tumblers all I can say is amazing…

T
Tamara DeCaro
5 stars!

Love this resin

A
Allison Thorpe
Smooth as glass

I used this on 4x4 ceramic tiles for coasters and the finish was perfect. They were huge sellers at the last show I’ve already ordered more.

D
Dorothy Williams

Liquid Art Elite™ Epoxy Resin

F
Flora Mccoy
Best Resin ever!

I’ve tried several different brands of resin over the last year and always had problems with resin to the point that I almost gave up on it. I used to have to coat my coasters multiple times to get rid of the “dimples” etc. Actually thought I
would like Krystal Resin but the working time is too short. I love KS Liquid Art Elite. I’ve never had one problem!!! I’m about or open my second order!

K
Kammie Kaschnigg
Love love love

Only epoxy I will use going forward

D
Dawn Marin Bullis
Newbie

Loving my KSResin, being a beginner I find it’s easy to work with and I’m loving the finished product..

n
natasha garza
I love this resin

I was looking for a thinner resin to work and I found it! Here’s the catch, you are going to love it so much you’re going to want to buy it all!