Liquid Cast™ Deep Pour Epoxy Resin
Liquid Cast™ Deep Pour Epoxy Resin
Liquid Cast™ Deep Pour Epoxy Resin
Liquid Cast™ Deep Pour Epoxy Resin

Liquid Cast™ Deep Pour Epoxy Resin

Regular price$90.00
/
  • Made in the USA
  • In stock, ready to ship
  • Free shipping to continental US

Need a durable top-coat for your project?

Add a top-coat of Liquid Stone Elite for increased scratch resistance, hardness, and temperature resistance.

Casting small items under 1"?

Switch to Crystal Cast 1" for incredible clarity and hardness.

Liquid Cast™ Deep Pour Epoxy Resin

Liquid Cast™ Deep Pour Epoxy Resin is a two part clear casting epoxy resin system formulated for encapsulating and deep pour casting projects. This product can be poured between a half inch and up to two inches in one pour with little to no trapped air.

Liquid Cast™ Deep Pour Epoxy Resin is the perfect choice for flower preservation, river tables, charcuterie boards, and many other casting projects which require layers of epoxy resin over half of an inch.

Note: Liquid Cast Deep Pour is not intended for use with small jewelry items, shallow pours, or as a coating system. Pours under 1/2" may remain flexible.

Mixed Viscosity: 850 CPS

✔️ 45+ Minute Working Time
✔️ Dry in 12-24 Hours
✔️ Excellent Air Release
✔️ 1:1 Mixing Ratio by Volume
✔️ High Gloss Finish
✔️ Made in the US
✔️ Low Viscosity
✔️ No VOC
✔️ Ultra-Clear

Product Instructions

Step 1. Prepare for Mixing

Gather your epoxy resin, mixing supplies, and personal protective equipment. We recommend at the very least using nitrile gloves, safety glasses, clothing to protect from spills. Be sure to use epoxy resin in a well-ventilated room or use an air-purifying respirator.

Step 2. Calculate Coverage Area

Using a tape measure, measure the length, width, and depth of your mold and then input this information into the Epoxy Resin Coverage Calculator to determine how much epoxy resin you will need to fill the mold.

Step 3. Pour Epoxy Resin into a Mixing Container

Measure your desired amount of epoxy resin at a 1:1 ratio by volume into a graduated mixing cup. Pour the resin first, allow it a moment to settle, and then follow up with an equal amount of hardener.

Step 4. Mix Thoroughly for Four Minutes

Mix the two parts together for a total of four minutes. Be sure to scrape the bottom and sides of the container while mixing so that there is no un-mixed epoxy resin. Aggressive mixing can introduce excessive air, stir slowly but thoroughly. Continue to stir until the epoxy resin no longer has ribbons and returns to clear.

Step 5. Pour into Mold

Pour the epoxy resin slowly into your mold in 1/4" increments. To minimize trapped air in your project pour in 1/4" increments, allow 1-2 minutes for air to surface, sweep your torch or heat gun over the surface to pop any bubbles, and repeat until you reach your desired depth.

 

Liquid Cast Deep Pour Epoxy Resin is not meant for shallow pours under 1/2". If poured under 1/2" the epoxy resin could remain flexible.

 

In most cases we recommend pouring at 1" - 1.5" to ensure the epoxy resin does not overheat during the curing process. It is better to start small and add layers as necessary than pour too much at once.

Step 6. Use a Torch or Heat Gun to Remove Trapped Air

Quickly sweep a propane torch or heat gun across the surface being sure to keep the flame 6-8 inches away from the surface. Do not overheat the epoxy resin or hold the heat in one spot for too long. We recommend heating the epoxy resin only during the working time, do not apply heat once the working time has passed. After eliminating bubbles allow the epoxy resin time to cure in the appropriate environment (listed in Technical Data below).

 

Ensure that you are working in a well-ventilated room or using an air-purifying respirator.

Questions? Check out our FAQ.

 

Not finding what you need? Email support@ksresin.com for project support.

Common Product Uses

Flower Preservation
Encapsulation
Automotive Shift Knobs
Wine Stoppers
Charcuterie Boards
Paper Weights

Technical Data

Ideal Curing Temperature - 65°F - 80°F
Working Time - 45 Minutes
Dry to Touch - 12-36 Hours
Full Cure - 3-7 Days (Depending on volume and mass of pour)
Maximum Recommended Coating Thickness - Not intended for use as a coating system
Maximum Recommended Casting Thickness - 2" per layer
Temperature Resistance - 475°F
Shelf Life (Unopened) - 12 Months
Shelf Life (Opened) - 6 Months (Depending on environment)
Shore D Hardness - 60-70

Kit Sizes

32oz Kit = 16 ounces Resin + 16 ounces Hardener
64oz Kit = 32 ounces Resin + 32 ounces Hardener
1 Gallon Kit = 64 ounces Resin + 64 ounces Hardener
2 Gallon Kit* = 128 ounces Resin + 128 ounces Hardener

 

* (Shipped in multiple 64oz Containers for ease of use, may be occasionally sent in 128oz containers if 64oz containers are unavailable at the time)

Customer Reviews

Looking for tips, tricks, and product support? Join our Facebook Group

Customer Reviews

Based on 172 reviews
80%
(137)
8%
(13)
11%
(19)
1%
(1)
1%
(2)
D
Dianna Blevins
Love It

Easy to work with

J
Julie A Baker

Deep Pour Resin

J
Jeanne Venuti
Great for deep pours

I love working with this resin on deep pours. My pieces came out crystal clear!

K
Karen Hoffman
We love it!!

Deep pour cures crystal clear. Great for making coasters!

A
Amber Pendley
Excellent product

I absolutely love their deep pour. It releases bubbles on it own and cure super clear!

C
Christy Innes

I absolutely love it!!

D
Dianna Glynn
great products

Love the epoxy, tools, and color products! I’m a casual user, mostly molds, and made KS my go-to place.

S
Sydnee Wiland
Love it!

This was my first time using the deep pour and I love it! I used this for a bridal bouquet and it turned out so clear and it’s so easy to work with. Very happy with my purchase!

L
Lara Al salman
The Artists Choice Resin

I can’t thank you enough for this resin!
Honestly I tried so many other brands including a very well known popular one but none gave me the results you did!
Starting from mixing the resin, I noticed huge difference with the bubble issue that other brands have.
The working time is amazing,they don’t get hardened while still working. The results of my pieces(bubble free).Thank you! Thank you!
The only thing I wished to have was the gallon size but when I purchased mine you were out of stock.
Otherwise,I would say,This is the best brand I tried so far.

S
Susanna Otis

Liquid Cast™ Deep Pour Epoxy Resin