Need a Longer Working Time?
Switch to Liquid Art Ultra UV for a 45+ minute working time.
Liquidy Split Ultra UV™ Epoxy Resin
Liquidy Split Ultra UV™ is a two part epoxy resin system with accelerated drying properties. This product is ideal for those who require an epoxy resin with a shorter working time, drying time, and curing time. You need to work quickly as Liquidy Split Ultra UV sets significantly faster than our other epoxy resin systems.
Liquidy Split Ultra UV contains our Ultra UV™ inhibitors to protect the epoxy resin from harmful UV rays that can damage and cause eventual yellowing to your project. Liquidy Split Ultra UV™ has shown up to 10 times longer lasting clarity in comparison to Liquidy Split™ and similar competitors products when tested in a simulated UV testing machine.
Liquidy Split Ultra UV™ is unique in it's ability to stay clear while curing, unlike other fast drying epoxy resin systems. Due to the unique nature of this product, it can be used as a top coat and over light colors.
This product does not require a UV light to cure.
Mixed Viscosity: 6800 CPS
This product uses raw materials that may have slight color variation from batch to batch. In most cases this shouldn't effect the clarity of the project unless applied over a white base.
✔️ 15 Minute Working Time
✔️ Dry in 3-4 Hours
✔️ 1:1 Mixing Ratio by Volume
✔️ High Gloss Finish
☀️ Industry Leading UV Resistance
✔️ Made in the US
✔️ Medium Viscosity
✔️ No VOC
Step 1. Prepare for Mixing
Gather your epoxy resin, mixing supplies, and personal protective equipment. We recommend at the very least using nitrile gloves, safety glasses, clothing to protect from spills. Be sure to use epoxy resin in a well-ventilated room or use an air-purifying respirator.
Step 2. Pour Epoxy Resin into a Mixing Container
After determining the amount of epoxy resin you will need, measure your desired amount of epoxy resin at a 1:1 ratio by volume into a graduated mixing cup. Pour the resin first, allow it a moment to settle, and then follow up with an equal amount of hardener.
For best results mix a minimum of 2 fluid ounces (60ml) of epoxy resin and hardener. Mixing less than 2 ounces increases the chance of the mixing ratio being off and causing issues during the curing process.
Need help deciding how much epoxy resin is required? Visit our Epoxy Resin Coverage Calculator here.
Step 3. Mix Thoroughly for Four Minutes
Mix the two parts together for a total of four minutes. Be sure to scrape the bottom and sides of the container while mixing so that there is no un-mixed epoxy resin. Aggressive mixing can introduce excessive air, stir slowly but thoroughly. Continue to stir until the epoxy resin no longer has ribbons and returns to clear.
Step 4. Apply to Surface
Apply the epoxy resin to your surface immediately after mixing. You can do this by using your gloved hand, a foam roller, a brush, a trowel, and so many other tools! Make sure that epoxy resin completely covers the surface before moving to the next step. If you do not apply enough epoxy resin it may pull away from the edge. If you apply too much epoxy resin it can drip off or run to one end depending on the surface.
Step 5. Use a Torch or Heat Gun to Remove Trapped Air
Quickly sweep a propane torch or heat gun across the surface being sure to keep the flame 6-8 inches away from the surface. Do not overheat the epoxy resin or hold the heat in one spot for too long. We recommend heating the epoxy resin only during the working time, do not apply heat once the working time has passed. After eliminating bubbles allow the epoxy resin time to cure in the appropriate environment (listed in Technical Data below).
Ensure that you are working in a well-ventilated room or using an air-purifying respirator.
Questions? Check out our FAQ.
Not finding what you need? Email firstname.lastname@example.org for project support.
- Stainless Steel Tumblers
- Canvas Paintings
- Wood Substrates
- Filling Voids
- Small Molds
- & Much More
Ideal Curing Temperature - 75°F - 80°F
(Temperatures below 75°F can cause issues during curing)
Working Time - 15 Minutes
Dry to Touch - 3-4 Hours
Full Cure - 24 Hours
Maximum Recommended Coating Thickness - 1/8"
Maximum Recommended Casting Thickness - 1/4"
Temperature Resistance - 475°F
Shelf Life (Unopened) - 12 Months
Shelf Life (Opened) - 6 Months (Depending on environment)
Shore D Hardness - 75
8oz Kit = 4 ounces Resin + 4 ounces Hardener
16oz Kit = 8 ounces Resin + 8 ounces Hardener
32oz Kit = 16 ounces Resin + 16 ounces Hardener
64oz Kit = 32 ounces Resin + 32 ounces Hardener
1 Gallon Kit = 64 ounces Resin + 64 ounces Hardener
2 Gallon Kit* = 128 ounces Resin + 128 ounces Hardener
* (Shipped in multiple 64oz Containers for ease of use, may be occasionally sent in 128oz containers if 64oz containers are unavailable at the time)
Works well, no complaints
Liquidy Split Ultra UV™ Fast Set Epoxy Resin - Best UV Resistance Quick Dry
I am a tumbler maker, I have tried SEVERAL brands. As soon as I go my hands on liquidy spit UV, I stopped looking. I will not use anything else. The shine, the cure time, the UV protection, EVERYTHING about it is amazing.
I have had amazing luck with this fast set resin which i have not had with others, I won't use for all projects but when I need it fast and i t warrants it - I will be using it 100%.
This product is awesome.. it has short working time but drys in 2 hrs.. what a life saver. Perfect for top coats and tumblers.. After trying many resins, I'm settled on the KS Resin products.
This was the 3rd brand of 2 part epoxy I’ve tried since switching from UV resin. It was recommended by one of my craft suppliers and this literally changed my business. I’m a full time nurse and part time crafter and normally I’d have to wait 72 hours for a full cure before flipping my acrylic over to seal the other side. This stuff is hard to the touch in less than 12 hours. I’m getting so much done. It’s amazing. It does have a short work time but I’ve been able to make it work with smaller amounts. I’m obsessed.
This was my first time I’ve tried this & I loved it!! Great to work with & dries fast.
Liquidy split is really easy to work with & that shine! ❤️
Best epoxy out there! Little to no smell, easy to work with, glossy finish and super fast drying! Love love love
I have tried a few other brands of fast setting epoxy. Liquidy split is the best hands down.